#5---Basic Cam Guidelines for Magnum & LA Hydraulic Roller Cams
Is this cam right for me? | 8/1/2019 |
|
Real Chrysler Hydraulic Roller Camshafts
|
|
Camshaft P/NSmall Block
|
Intake duration @ .050" tappet lift
|
Power
Range
SB
|
General engine/chassis requirements
|
|
SER9204ALN-14
|
192
|
IDLE
to
4600
|
Extra power for towing, no computer mods required. Works well with a modified OEM throttle body and likes the FI AirGap Intake manifold. Basic upgrade cam for 5.2L.
|
|
SER0814ALN-14
|
208
|
IDLE
to
5500
|
Step up from factory R/T camshaft, more power, wider power band. This cam likes the FI AirGap intake manifold and a modified OEM throttle body.
|
|
SER1418ALN-14
|
214
|
1400
to
5800
|
Mild street, works well with stock heads,Modified OEM throttle body and headers. Works well with the FI AirGap Intake.The 5.2L/5.9L requires computer change. Good super charger camshaft.
|
|
SER1828ALN-14
|
218
|
1800
to
6100
|
Computer Programmer required for 5.2L/5.9L V8. Hot street, likes modified OEM or Billet throttle body,FI AirGap intake manifold, Performance heads, roller rockers, 24lbs injectors, 380 HP potential at the flywheel.
|
|
SER2228ALN
|
222
|
2000
to
6300
|
Street/strip, Super Prepped Edelbrock or Iron heads, Hughes Billet throttle body, FI AirGap intake manifold with deep port match, headers, 2800+ RPM stall, programmable computer, inline fuel pump, 425+ HP potential at flywheel.
|
|
SER2836ALN
|
228
|
2300
to
6600
|
Serious street/strip, 490+ HP at flywheel potential. Super Prepped or fully ported Edlebrock or Iron heads, Hughes Billet throttle body, FI AirGap intake manifold with Stage 1 porting. Good fuel system and programmable computer, 3200+ RPM stall.
|
|
SER3642ALN
|
236
|
2600
to
6800
|
Strip and limited street use, Super Prepped or fully ported Edlebrock iron heads, Hughes
Billet throttle body, FI AirGap intake manifold with Stage 1 porting. programmable computer or tuner, good fuel system, 3400+ RPM stall. 500+ HP potential at flywheel.
|
|
Larger cams are available. Call for specs.
Power Ranges: These are the "sweet spot" in the power range. Generally we suggest shifting at 300-500 RPM above the "sweet spot" for the best ET's. If you need more power above the shown power range, select the next larger camshaft. If you need more power below the shown power range, select the next smaller camshaft. If you keep your foot in it, they will pull well past their sweet spot.
Spring Warning: Our camshafts are not comparable to other manufacturers and require special valve spring pressures to operate and live satisfactorily. ONLY USE our springs, most other springs will not work properly and may cause severe damage. Valve spring pressures and installed heights are supplied with each camshaft.
|
Computer Change: Hand held tuners like the Diablo or SCT (HUG SCT3200, HUG SCT3200A, HUG SCT3200B) that we offer are a performance part and will improve any engine combination they are used with. See SCT Tuner Tech Article for more information.
|
