#10---360/426 Stroker (11304)

12/29/2021


 

360-426 Dyno Engine
 
Block: 360 Magnum 4.030 Bore
Crank Assembly: Our “Hemi Sized” 426 stroker kit (11.6:1cr) with 4.180 stroke
Heads: Edelbrock Magnum our stage 3 porting, 2.08 int. vales
Intake: 340 Victor deep port matched
Rockers: Our 1.6:1 s/s rockers
Camshaft: Our hydraulic roller HER6468AL-7-3
Carb: BG 850 annular 80-88
Timing: 30º
Ignition: MSD
 
Over View
This was a street engine using 92 octane pump gas with cylinder pressure that was low enough that 90 octane could have been run. The goal was a very high torque, fun to drive, street car, and with over 450 lbs/ft torque at 3000R.P.M. it will be a hand full to drive on the street and a very quick accelerating. The final dyno pull, as shown here had 595 lb/ft of torque at 4900R.P.M. and 606HP at 5900RPM. This engine was over 100% volume metric efficiency from 4600RPM up, very good.
 
          -------What This Test Shows -----
 
That it is possible to build a very strong street small block that will live on pump gas 92 octane and be lots of fun to drive, if you can hook it up.  In a properly set up chassis, this engine has the potential of mid 10’s in a 3500 lbs. car and driver.
 
More torque could be developed and at a lower RPM with a smaller cam. Conversely a larger cam could be used to develop more power at a higher RPM, but this might require higher compression and a higher flowing intake manifold.
 
Note: I would expect a similarly equipped 340”/416” or a 360”/408” to develop the same horsepower and about 20lbs/ft/ less torque.
 
 
 
Engine Speed RPM Torque HP Vol Eff %
3000 451.1 257.7 82.1
3100 457.5 270.0  79.8
3200 463.2 282.2  78.5
3300 466.5 293.1  77.4
3400 468.1 303.0  76.9
3500 469.8 313.1  77.3
3600 471.5 323.2  77.5
3700 477.3 336.2  77.7
3800 489.9 354.5  80.9
3900 507.1 376.6  84.3
4000 522.7 398.1  88.4
4100 537.9 419.9  91.1
4200 553.6 442.7  92.9
4300 567.2 464.4  95.5
4400 579.2 485.3  97.6
4500 584.5 500.8  99.8
4600 587.7 514.8  100.7
4700 588.3 526.4  101.2
4800 595.6 544.3  102.8
4900 595.7 555.8  104.1
5000 592.2 563.8  104.3
5100 588.9 571.8  105.5
5200 584.4 578.6  105.8
5300 575.7 581.0  105.1
5400 558.3 574.0  104.5
5500 552.2 578.2  103.7
5600 566.9 604.4  103.6
5700 558.8 606.4  103.1
5800 546.4 603.4  102.2
5900 539.9 606.5  101.5
6000 526.6 601.6  101.1
6100 520.1 604.1  100.6
6200 512.5 605.0  99.6

 

Home | Phone: 309-745-9558 | Email: information@hughesengines.com